Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Lubrication
Model Year: 2008 Model: Sequoia Doc ID: RM000002WGS004X
Title: 2UZ-FE LUBRICATION: OIL PRESSURE SWITCH: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL OIL PRESSURE SENDER GAUGE ASSEMBLY



(a) Apply adhesive to 2 or 3 threads of the sender gauge.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent

(b) Install the oil pressure sender gauge assembly.

Torque: 15 N·m (153 kgf·cm, 11 ft·lbf)

NOTICE:

Do not start the engine within 1 hour of installation.

(c) Connect the oil pressure sender gauge assembly connector.

2. INSPECT FOR OIL LEAK 2UZ-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT (2008 Sequoia)+

3. CHECK ENGINE OIL LEVEL 2UZ-FE LUBRICATION: LUBRICATION SYSTEM: ON-VEHICLE INSPECTION (2008 Sequoia)+

4. INSTALL NO. 1 ENGINE UNDER COVER 2UZ-FE LUBRICATION: OIL AND OIL FILTER: REPLACEMENT (2008 Sequoia)+